Tree Cutting Service in North Richland Hills, Texas
Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving North Richland Hills and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide tree cutting in North Richland Hills, TX?
Yes — we do tree cutting throughout North Richland Hills, TX. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most North Richland Hills jobs fall between $300 and $2,200. We are a licensed, insured Tarrant County tree service with a Certified Arborist on staff, and estimates cost nothing.
With about 69,917 residents, North Richland Hills has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them. “Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in North Richland Hills is a rigging job rather than a felling job on most residential lots.
- Service
- Tree Cutting
- Area
- North Richland HillsTarrant County
- Typical range
- $300–$2,200per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in North Richland Hills
- Felling where there is room to drop it whole
- Sectional cutting where there is not
- Cutting back limbs off roofs and fences
- Bucking and cutting up storm-fallen trees
- Firewood cut and stacked on request
Three jobs that all get called “tree cutting”
When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.
It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.
The two-thirds rule for hiring
Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.
How the job runs
Tree Cutting in North Richland Hills, step by step
Tell us which of the three it is
Down, back, or up — it decides the crew and the equipment.
Site visit and written quote
Free, and it includes exactly what is being cut and what happens to the wood.
Utilities and access checked
Service drops, sprinkler lines, gate widths.
Cut in a planned sequence
Tension released deliberately; anything over a target roped rather than dropped.
Wood handled as agreed
Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.
Pricing
What tree cutting costs in North Richland Hills
Most tree cutting work in North Richland Hills falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Which of the three jobs it actually is
- Height, diameter and total wood volume
- Whether there is a clear drop zone
- What happens to the wood — haul-off is a real share of the cost
- Access and how far material has to be carried to the truck
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
North Richland Hills soil, species and timing
Tree work in North Richland Hills is shaped by the soil more than anything else. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. The species that handle it — live oak, cedar elm, Texas ash — are the ones you see on every mature street, and iron chlorosis is their recurring problem.
We cover ZIP codes 76180 and 76182. North Richland Hills sits inside a tight cluster of towns we run every week: Watauga (2 mi), Hurst (2 mi), Richland Hills (3 mi) and Haltom City (4 mi) are all on the same route.
Timing oak work in North Richland Hills
Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.
People in North Richland Hills search for this as tree cutters, tree felling, or simply cut down a tree in North Richland Hills — it is all the same job, and the estimate is free either way.
FAQ
Tree Cutting in North Richland Hills — questions we get asked
How much does it cost to cut down a tree in North Richland Hills?
Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.
Will you leave the wood for firewood?
Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.
Are you licensed and insured to work in North Richland Hills?
We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.
Do you give free estimates in North Richland Hills?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Do you serve areas outside North Richland Hills?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. North Richland Hills is on our normal route.
What happens if it rains on my scheduled day?
We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.
Do you offer discounts for multiple trees?
Effectively yes — the second tree on the same visit costs less than it would on its own because setup, travel and haul-off are already covered. If you have several trees needing attention, get them all quoted at once rather than one at a time.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
Other tree services we provide in North Richland Hills
Tree Surgeon in North Richland Hills
The climbing, cutting and rigging work — done by people with the credentials to back the name.
Learn more →Commercial Tree Service in North Richland Hills
Property-wide tree work for HOAs, commercial sites, churches and municipalities.
Learn more →Certified Arborist in North Richland Hills
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Tree Pruning in North Richland Hills
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Stump Grinding in North Richland Hills
Grinding stumps 6–12 inches below grade so the ground can be re-used.
Learn more →Tree Trimming in North Richland Hills
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Tree Cutting near North Richland Hills
We cover the whole corridor, so a job in North Richland Hills is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.
Need tree cutting in North Richland Hills?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.