Licensed & insured Certified Arborist on staff Serving DFW since 2014

Tree Cutting Service in Hurst, Texas

Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Hurst and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.

Call (817) 508-9940 Get a free estimate

Do you provide tree cutting in Hurst, TX?

Tree Service Pros provides tree cutting in Hurst, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Hurst jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Hurst is inside our regular Tarrant County service area — call (817) 508-9940.

“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. With about 40,413 residents, Hurst has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them.

Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Hurst is a rigging job rather than a felling job on most residential lots.

Service
Tree Cutting
Area
HurstTarrant County
Typical range
$300–$2,200per job, varies by site
Estimates
Freewritten, no obligation

What is included in Hurst

  • Felling where there is room to drop it whole
  • Sectional cutting where there is not
  • Cutting back limbs off roofs and fences
  • Bucking and cutting up storm-fallen trees
  • Firewood cut and stacked on request

Three jobs that all get called “tree cutting”

When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.

It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.

The two-thirds rule for hiring

Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.

How the job runs

Tree Cutting in Hurst, step by step

  1. Tell us which of the three it is

    Down, back, or up — it decides the crew and the equipment.

  2. Site visit and written quote

    Free, and it includes exactly what is being cut and what happens to the wood.

  3. Utilities and access checked

    Service drops, sprinkler lines, gate widths.

  4. Cut in a planned sequence

    Tension released deliberately; anything over a target roped rather than dropped.

  5. Wood handled as agreed

    Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.

Pricing

What tree cutting costs in Hurst

Most tree cutting work in Hurst falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.

What moves the price

  • Which of the three jobs it actually is
  • Height, diameter and total wood volume
  • Whether there is a clear drop zone
  • What happens to the wood — haul-off is a real share of the cost
  • Access and how far material has to be carried to the truck

The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.

Local conditions

Hurst soil, species and timing

Hurst sits on thin, rocky alkaline clay over limestone bedrock — Fort Worth Prairie ground. That drives what grows well here (live oak, cedar elm and Texas ash dominate the older streets) and what goes wrong: iron chlorosis is the condition we are called out for most.

We cover ZIP codes 76053, 76054, 77359 and 77362. Because we are already working nearby, scheduling in Hurst is usually easy — North Richland Hills (2 mi), Colleyville (3 mi), Bedford (3 mi) and Watauga (4 mi) are all on the same route.

Timing oak work in Hurst

Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.

People in Hurst search for this as tree cutting service, cut down a tree, or simply tree cutters in Hurst — it is all the same job, and the estimate is free either way.

FAQ

Tree Cutting in Hurst — questions we get asked

How much does it cost to cut down a tree in Hurst?

Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.

Will you leave the wood for firewood?

Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.

Will you damage my lawn or sprinkler system?

We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.

Can you work around my schedule?

Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.

Do you offer discounts for multiple trees?

Effectively yes — the second tree on the same visit costs less than it would on its own because setup, travel and haul-off are already covered. If you have several trees needing attention, get them all quoted at once rather than one at a time.

What happens if it rains on my scheduled day?

We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.

Do you serve areas outside Hurst?

Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Hurst is on our normal route.

Do you give free estimates in Hurst?

Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.

Tree Cutting near Hurst

We cover the whole corridor, so a job in Hurst is rarely a special trip.

See all cities in Tarrant County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.

Need tree cutting in Hurst?

Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.

(817) 508-9940

Request a free estimate

Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.

Call (817) 508-9940