Stump Grinding & Stump Removal in Grandview, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Grandview and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Grandview, TX?
Tree Service Pros provides stump grinding in Grandview, Texas. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Grandview jobs fall between $95 and $600. Estimates are free and in writing, the crew is insured, and Grandview is inside our regular Johnson County service area — call (817) 508-9940.
A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate. Grandview is a small Johnson County town of roughly 1,879 — bigger lots, older trees, and fewer crews willing to drive out.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. That matters for grinding: in Grandview the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- GrandviewJohnson County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Grandview
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Grandview, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Grandview
Most stump grinding work in Grandview falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Grandview soil, species and timing
The fort worth prairie runs under Grandview: thin, rocky alkaline clay over limestone bedrock. Mature canopy here is mostly live oak and cedar elm, with Shumard oak where there is more depth. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass.
We cover ZIP code 76050. Because we are already working nearby, scheduling in Grandview is usually easy — Itasca (8 mi), Covington (8 mi), Coyote Flats (9 mi) and Alvarado (9 mi) are all on the same route.
People in Grandview search for this as stump removal service, stump grinder, or simply tree stump removal in Grandview — it is all the same job, and the estimate is free either way.
FAQ
Stump Grinding in Grandview — questions we get asked
Can I plant a new tree where the old stump was in Grandview?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do you give free estimates in Grandview?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Do you offer discounts for multiple trees?
Effectively yes — the second tree on the same visit costs less than it would on its own because setup, travel and haul-off are already covered. If you have several trees needing attention, get them all quoted at once rather than one at a time.
What payment methods do you take?
All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.
Are you licensed and insured to work in Grandview?
We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.
What happens if it rains on my scheduled day?
We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.
Will you damage my lawn or sprinkler system?
We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.
Other tree services we provide in Grandview
Emergency Tree Service in Grandview
Storm response for trees on houses, drives, fences and power drops.
Learn more →Tree Disease Treatment in Grandview
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Tree Pruning in Grandview
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Commercial Tree Service in Grandview
Property-wide tree work for HOAs, commercial sites, churches and municipalities.
Learn more →Land Clearing in Grandview
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Brush Removal in Grandview
Hauling off brush piles, storm debris and yard-waste stacks.
Learn more →Stump Grinding near Grandview
We cover the whole corridor, so a job in Grandview is rarely a special trip.
See all cities in Johnson County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Need stump grinding in Grandview?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.