Tree Cutting Service in Roanoke, Texas
Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Roanoke and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide tree cutting in Roanoke, TX?
Tree Service Pros provides tree cutting in Roanoke, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Roanoke jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Roanoke is inside our regular Tarrant County service area — call (817) 508-9940.
“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. Roanoke runs to about 9,665 people, close enough to Fort Worth (18 miles) to be on our regular route rather than a special trip.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Roanoke is a rigging job rather than a felling job on most residential lots.
- Service
- Tree Cutting
- Area
- RoanokeTarrant County
- Typical range
- $300–$2,200per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Roanoke
- Felling where there is room to drop it whole
- Sectional cutting where there is not
- Cutting back limbs off roofs and fences
- Bucking and cutting up storm-fallen trees
- Firewood cut and stacked on request
Three jobs that all get called “tree cutting”
When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.
It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.
The two-thirds rule for hiring
Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.
How the job runs
Tree Cutting in Roanoke, step by step
Tell us which of the three it is
Down, back, or up — it decides the crew and the equipment.
Site visit and written quote
Free, and it includes exactly what is being cut and what happens to the wood.
Utilities and access checked
Service drops, sprinkler lines, gate widths.
Cut in a planned sequence
Tension released deliberately; anything over a target roped rather than dropped.
Wood handled as agreed
Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.
Pricing
What tree cutting costs in Roanoke
Most tree cutting work in Roanoke falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Which of the three jobs it actually is
- Height, diameter and total wood volume
- Whether there is a clear drop zone
- What happens to the wood — haul-off is a real share of the cost
- Access and how far material has to be carried to the truck
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Roanoke soil, species and timing
The ground under Roanoke is shallow alkaline clay over limestone, typical of the Fort Worth Prairie. Soil pH runs around 7.8–8.3, which is why iron chlorosis shows up here so consistently — high soil pH locks up iron and manganese, so red oaks and maples yellow between the veins while the veins stay green.
We cover ZIP codes 76262 and 76299. Because we are already working nearby, scheduling in Roanoke is usually easy — Westlake (1 mi), Trophy Club (2 mi), Keller (5 mi) and Southlake (6 mi) are all on the same route.
Timing oak work in Roanoke
Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.
People in Roanoke search for this as limb cutting, tree felling, or simply tree cutting service in Roanoke — it is all the same job, and the estimate is free either way.
FAQ
Tree Cutting in Roanoke — questions we get asked
How much does it cost to cut down a tree in Roanoke?
Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.
Will you leave the wood for firewood?
Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.
What payment methods do you take?
All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.
Do you offer discounts for multiple trees?
Effectively yes — the second tree on the same visit costs less than it would on its own because setup, travel and haul-off are already covered. If you have several trees needing attention, get them all quoted at once rather than one at a time.
Do you give free estimates in Roanoke?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
Do you serve areas outside Roanoke?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Roanoke is on our normal route.
Other tree services we provide in Roanoke
Stump Grinding in Roanoke
Grinding stumps 6–12 inches below grade so the ground can be re-used.
Learn more →Tree Trimming in Roanoke
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Tree Disease Treatment in Roanoke
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Brush Removal in Roanoke
Hauling off brush piles, storm debris and yard-waste stacks.
Learn more →Emergency Tree Service in Roanoke
Storm response for trees on houses, drives, fences and power drops.
Learn more →Land Clearing in Roanoke
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Cutting near Roanoke
We cover the whole corridor, so a job in Roanoke is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.
Need tree cutting in Roanoke?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.