Licensed & insured Certified Arborist on staff Serving DFW since 2014

Tree Cutting Service in Everman, Texas

Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Everman and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.

Call (817) 508-9940 Get a free estimate

Do you provide tree cutting in Everman, TX?

Tree Service Pros provides tree cutting in Everman, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Everman jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Everman is inside our regular Tarrant County service area — call (817) 508-9940.

“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. Everman runs to about 6,154 people, close enough to Fort Worth (9 miles) to be on our regular route rather than a special trip.

Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Everman is a rigging job rather than a felling job on most residential lots.

Service
Tree Cutting
Area
EvermanTarrant County
Typical range
$300–$2,200per job, varies by site
Estimates
Freewritten, no obligation

What is included in Everman

  • Felling where there is room to drop it whole
  • Sectional cutting where there is not
  • Cutting back limbs off roofs and fences
  • Bucking and cutting up storm-fallen trees
  • Firewood cut and stacked on request

Three jobs that all get called “tree cutting”

When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.

It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.

The two-thirds rule for hiring

Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.

How the job runs

Tree Cutting in Everman, step by step

  1. Tell us which of the three it is

    Down, back, or up — it decides the crew and the equipment.

  2. Site visit and written quote

    Free, and it includes exactly what is being cut and what happens to the wood.

  3. Utilities and access checked

    Service drops, sprinkler lines, gate widths.

  4. Cut in a planned sequence

    Tension released deliberately; anything over a target roped rather than dropped.

  5. Wood handled as agreed

    Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.

Pricing

What tree cutting costs in Everman

Most tree cutting work in Everman falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.

What moves the price

  • Which of the three jobs it actually is
  • Height, diameter and total wood volume
  • Whether there is a clear drop zone
  • What happens to the wood — haul-off is a real share of the cost
  • Access and how far material has to be carried to the truck

The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.

Local conditions

Everman soil, species and timing

Tree work in Everman is shaped by the soil more than anything else. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. The species that handle it — live oak, cedar elm, Texas ash — are the ones you see on every mature street, and iron chlorosis is their recurring problem.

Because we are already working nearby, scheduling in Everman is usually easy — Forest Hill (3 mi), Rendon (4 mi), Edgecliff Village (4 mi) and Kennedale (4 mi) are all on the same route.

Timing oak work in Everman

Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.

People in Everman search for this as cut down a tree, tree cutting service, or simply tree felling in Everman — it is all the same job, and the estimate is free either way.

FAQ

Tree Cutting in Everman — questions we get asked

How much does it cost to cut down a tree in Everman?

Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.

Will you leave the wood for firewood?

Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.

Do you clean up afterwards?

Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.

How soon can you get to my property in Everman?

Estimates in Everman are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.

Are you licensed and insured to work in Everman?

We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.

Do you give free estimates in Everman?

Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.

Do you serve areas outside Everman?

Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Everman is on our normal route.

Tree Cutting near Everman

We cover the whole corridor, so a job in Everman is rarely a special trip.

See all cities in Tarrant County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.

Need tree cutting in Everman?

Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.

(817) 508-9940

Request a free estimate

Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.

Call (817) 508-9940