Licensed & insured Certified Arborist on staff Serving DFW since 2014

Tree Cutting Service in Cleburne, Texas

Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Cleburne and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.

Call (817) 508-9940 Get a free estimate

Do you provide tree cutting in Cleburne, TX?

Tree Service Pros provides tree cutting in Cleburne, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Cleburne jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Cleburne is inside our regular Johnson County service area — call (817) 508-9940.

“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. With about 31,352 residents, Cleburne has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them.

Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Cleburne is a rigging job rather than a felling job on most residential lots.

Service
Tree Cutting
Area
CleburneJohnson County
Typical range
$300–$2,200per job, varies by site
Estimates
Freewritten, no obligation

What is included in Cleburne

  • Felling where there is room to drop it whole
  • Sectional cutting where there is not
  • Cutting back limbs off roofs and fences
  • Bucking and cutting up storm-fallen trees
  • Firewood cut and stacked on request

Three jobs that all get called “tree cutting”

When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.

It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.

The two-thirds rule for hiring

Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.

How the job runs

Tree Cutting in Cleburne, step by step

  1. Tell us which of the three it is

    Down, back, or up — it decides the crew and the equipment.

  2. Site visit and written quote

    Free, and it includes exactly what is being cut and what happens to the wood.

  3. Utilities and access checked

    Service drops, sprinkler lines, gate widths.

  4. Cut in a planned sequence

    Tension released deliberately; anything over a target roped rather than dropped.

  5. Wood handled as agreed

    Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.

Pricing

What tree cutting costs in Cleburne

Most tree cutting work in Cleburne falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.

What moves the price

  • Which of the three jobs it actually is
  • Height, diameter and total wood volume
  • Whether there is a clear drop zone
  • What happens to the wood — haul-off is a real share of the cost
  • Access and how far material has to be carried to the truck

The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.

Local conditions

Cleburne soil, species and timing

The ground under Cleburne is shallow alkaline clay over limestone, typical of the Fort Worth Prairie. Soil pH runs around 7.8–8.3, which is why iron chlorosis shows up here so consistently — high soil pH locks up iron and manganese, so red oaks and maples yellow between the veins while the veins stay green.

We cover ZIP codes 76031 and 76033. Because we are already working nearby, scheduling in Cleburne is usually easy — Keene (4 mi), Coyote Flats (7 mi), Joshua (7 mi) and Rio Vista (8 mi) are all on the same route.

Timing oak work in Cleburne

Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.

People in Cleburne search for this as limb cutting, cut down a tree, or simply tree felling in Cleburne — it is all the same job, and the estimate is free either way.

FAQ

Tree Cutting in Cleburne — questions we get asked

How much does it cost to cut down a tree in Cleburne?

Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.

Will you leave the wood for firewood?

Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.

What payment methods do you take?

All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.

Are you licensed and insured to work in Cleburne?

We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.

What happens if it rains on my scheduled day?

We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.

Will you damage my lawn or sprinkler system?

We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.

How soon can you get to my property in Cleburne?

Estimates in Cleburne are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.

Do you serve areas outside Cleburne?

Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Cleburne is on our normal route.

Tree Cutting near Cleburne

We cover the whole corridor, so a job in Cleburne is rarely a special trip.

See all cities in Johnson County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.

Need tree cutting in Cleburne?

Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.

(817) 508-9940

Request a free estimate

Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.

Call (817) 508-9940