Stump Grinding & Stump Removal in Richland Hills, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Richland Hills and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Richland Hills, TX?
Yes — we do stump grinding throughout Richland Hills, TX. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Richland Hills jobs fall between $95 and $600. We are a licensed, insured Tarrant County tree service with a Certified Arborist on staff, and estimates cost nothing.
Richland Hills runs to about 8,621 people, close enough to Fort Worth (7 miles) to be on our regular route rather than a special trip. A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. That matters for grinding: in Richland Hills the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- Richland HillsTarrant County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Richland Hills
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Richland Hills, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Richland Hills
Most stump grinding work in Richland Hills falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Richland Hills soil, species and timing
The fort worth prairie runs under Richland Hills: thin, rocky alkaline clay over limestone bedrock. Mature canopy here is mostly live oak and cedar elm, with Shumard oak where there is more depth. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass.
We cover ZIP codes 76180 and 76182. Richland Hills sits inside a tight cluster of towns we run every week: Haltom City (2 mi), North Richland Hills (3 mi), Hurst (4 mi) and Watauga (4 mi) are all on the same route.
People in Richland Hills search for this as stump grinding service, stump removal, or simply stump removal service in Richland Hills — it is all the same job, and the estimate is free either way.
FAQ
Stump Grinding in Richland Hills — questions we get asked
Can I plant a new tree where the old stump was in Richland Hills?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
What happens if it rains on my scheduled day?
We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.
Will you damage my lawn or sprinkler system?
We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.
How soon can you get to my property in Richland Hills?
Estimates in Richland Hills are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Do you serve areas outside Richland Hills?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Richland Hills is on our normal route.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Other tree services we provide in Richland Hills
Tree Trimming in Richland Hills
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Tree Removal in Richland Hills
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Land Clearing in Richland Hills
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Pruning in Richland Hills
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Emergency Tree Service in Richland Hills
Storm response for trees on houses, drives, fences and power drops.
Learn more →Certified Arborist in Richland Hills
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Stump Grinding near Richland Hills
We cover the whole corridor, so a job in Richland Hills is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Need stump grinding in Richland Hills?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.